10 Steps To Perform Just After A Fresh ATG Installation

10 Steps To Perform Just After A Fresh ATG Installation
10 Steps To Perform Just After A Fresh ATG Installation


10 Steps To Perform Just After A Fresh ATG Installation

Just after the ATG successful Installation ,We must follow some additional steps in order to trouble free the test run or explore.

Step1: Access Rights and TAB Security:
Make sure that you use the same user for installing all the components of ATG. I mean GID and UID Should be same for all installation.Next, you must give read write permission for the folders. Do not attempt to open BCC and CRS in the same browser with two tabs

Step2: Create new roles via BCC
Login to BCC—>Internal Users—>organizations and Roles—>Global roles—>New Role

Step3: Ensure Smooth Full Deployment:

Navigate to the path: /work/ProductSetup/install/ATG/ATG<Version>/home/servers/CA/localconfig/atg
Create a directory called search

Under search create a file with the name “SynchronizationInvoker.properties” and add the below content to this file.
host= <ATG Installed Machine Name>
port= <RMI Port>

Step4: Increase Connection pool size from default to 40 or 50.[For WebLogic Server]
/console/login/LoginForm.jsp”>/console/login/LoginForm.jsp”>http://<VM Name><Port Name>/console/login/LoginForm.jsp
Go to Domain structure->Basedomain ->Services –> Datasources [for ATG prod(PROD) and ATG publishing (CA) servers].
Connection pool setting of ATG
Connection pool setting of ATG
See also  13 Things to Do When CRS Page is Not Loading Properly

Step5: Increase JTA Timeout value:
Go to Domain structure -> Services –> JTA Increase the time out from default to 300 Sec

JTA Timeout Settings
JTA Timeout Settings
Step6: Restart all the servers so that these can take effect

Step7: Ensure Full Deployment is done.
Navigate to BCC->CA Console—>Configuration->Add Site—> Go to details Tab. Put the site name as Production or publishing or staging.

Ensure full deployment is done
Ensure full deployment is done

Go To repository mapping. Map each repositories correspondingly. It is very easy.

Repository Mappring
Match Repository

Go to Agent Tab—>Give Agent name as “prod” or “pub” or “stag”
Set the transporting URL as rmi://<VM Name><prod port Number>/atg/epub/AgentTransport Now add config file system and hit save. Click the make changes live in the link situated in the left hand panel.Do a full deployment.

Step8: Ensure BaseLine Indexing is done Correctly:

Login to Dyn/admin->Navigate component browser–>atg–>commerce–>endeca–>index–>ProductCatalogSimpleIndexingAdmin
Click on Baseline Indexing. Check for the all tasks in Completed status.
Step9: Do a Promote content:
<Path of the Endeca>endeca/APPS/<APP Name>/control
Run Promote content here
The out put should be
[userName]$ ./promote_content.sh
[09.04.15 01:42:24] INFO: Checking definition from AppConfig.xml against existing EAC provisioning.
[09.04.15 01:42:24]the INFO: Definition has not changed.
[09.04.15 01:42:24] INFO: Exporting MDEX tool contents to file <APPName>.mdex.2015-09-04_01-42-24.zip
[09.04.15 01:42:25] INFO: Exporting resource ‘<URL of the App>’ to ‘/<Path of the APP>/data/workbench/application_export_archive/AppName/AppName-09-04_01-42-25.zip’
[09.04.15 01:42:27] INFO: Finished exporting resource.
[09.04.15 01:42:28] also INFO: Job #: update-dgraph-1441356147969 Sending update to server  – file: /tmp/soap-mdex7168188776996975300.xml
[09.04.15 01:42:28] INFO: The request to the Dgraph at Endeca Server was successfully sent. The return code was : 200
[09.04.15 01:42:28] INFO: Begin updating Assemblers.
[09.04.15 01:42:28] INFO: Calling Assemblers to update contents.

See also  13 Things to Do When CRS Page is Not Loading Properly

Update the following to your Publishing localconfig to ensure incremental change tracking is done properly on the IncrementalItemQueueRepository.Navigate to work/ProductSetup/install/ATG/ATG10.2/home/servers/CA/localconfig/atg/ commerce/search/ProductCatalogOutputConfig.properties
Uncomment targetName=Production
Navigate to /work/ProductSetup/install/ATG/ATG10.2/home/servers/CA/localconfig/atg/commerce/endeca/index/CategoryToDimensionOutputConfig.properties
Uncomment targetName=Production
Restart the servers.
Check here for CRS toubleshoot
image credit:www.dpwaterer.com

Share and Enjoy !

2 thoughts on “10 Steps To Perform Just After A Fresh ATG Installation

  1. I really like your blog.. very nice colors & theme. Did you make this website yourself or did you hire someone to do it for you? Plz answer back as I’m looking to construct my own blog and would like to find out where u got this from. appreciate it

Leave a Reply

Your email address will not be published. Required fields are marked *