4 Best Ways to Do Underwater Photography

Introduction to Underwater Photography

“Most photos are worth a thousand words. Underwater ones are worth a million words.”

If you are going to take professional photographs or having shots for fun, underwater photography is always mesmerizing. The focus on the dreamy movement of waves, coral reefs, and marine life takes you to another photography level.

But in the start, it can be a little overwhelming. First of all, there is a need to fully know your camera specifications before taking it into the water for shots.

There are some tips below that will work for you if you are going to do photography in your holidays or you are interested in starting your career in underwater photography.

By following these tips, you will get wonderful shots in your first dive. If you want to get information about entertainment then you can visit infotainmentbeats to get comprehensive knowledge about each and everything as well as entertainment.

Jump in:

Being comfortable in the water is a very obvious but important thing to understand for underwater photography. Your focus will be less on the breath-holding and worry about big waves if you know the underwater environment.

Once you are comfortable swimming and know about the tides, wave movements, and rips, the better your photographs will result. It is worthy of learning about the environment not just for your safety but also for taking extraordinary shots.

See also  4 Perfect Spots For a Videography in Singapore

Find Clear and Calm Water:

Water clarity is a critical thing if you want to capture the scenes underwater. Usually, high tides are better because more water produces more clarity.

Avoid regions around the beaches because a lot of sand and other sediments are swirling there that results in cloudy water.

But if taking photos in the unclear water will be your only option, you can still take photos; it will be just a matter of your creative skills. It would be best to take images in the best sunlight possible, usually between 10:00 am to 12:00 pm.

You should lower your aperture to blur the water if it is not clear and take it as the base color. It will result in a split-level image rather than a sharp focus point.

Learn About Light and Camera Settings:

Sunlight is a very critical thing in photography. It helps to enhance your images and brighten the tones of the object in a photo. If the water is deep and dark, try to be near the water’s surface so that the sunlight brightens up your object.

There are my researched settings below that may not always work in all environments, so play around and find what is best for you.

Further visit: 6 Simple iPhone Photography Tips & Tricks to Take Better Photos

White Balance: Auto or daylight mode is used to keep the blue shades a nice blue. If you use cloudy or other modes, they will show the orange or pink colors instead of the real shade that will change your watery image’s vibe.

See also  Top 5 Factors That Affect Product photography Pricing

Shutter Speed: It is always tricky to set the shutter speed at an accurate level. Lower shutter speed results in more light to your photo but blurs the subject.

In contrast, a higher speed of shutter will freeze the subject’s motion and capture detail but failed to lighten up the image, resulting in an undesirable dark background for some photographers.

So the tip is to use the high ISO setting, a powerful strobe, and a medium shutter speed that captures enough ambient light and freeze the subject at the same time.

ISO: High ISO produces noise creeping to your photos so try to low it as possible. An ISO of 100 to 200 can work great if you get the best sunlight. But if you are in dark, deep, or cloudy water, set it to as high as you see clear.

If you are working with a small digital camera, high ISO can make your image noisy. But if you are working with DSLR, you can set it up to 1600 without any problem.

Aperture: Set your aperture between f/8 to f/16 will result in a sharp and nice shot above or below water. If you want to capture a blurred image then set your aperture to a low level as f/2.8 to f/6 and it will blur the water level.

Focus: Set your camera in single subject mode if it gives you the option. It will able you to focus on your subject whether a fish or your friend by pressing the shutter button half down before taking the photo.

See also  Top 5 Best Selfie app for Android and ios in 2021

Use a Strobe:

It is not always necessary, but a strobe can affect your photographs in a good way. It throws more light to the scene thus helps to capture the original colors of the object by reducing the blue and green colors of the waves that often dominate the underwater images.

Strobe also helps to freeze the motion of water life and bring about the higher shutter speed of your camera which is very important to capture highly active objects of marine life.

Share and Enjoy !

Leave a Reply

Your email address will not be published. Required fields are marked *